The purpose of this webinar was to compare the calculation and results between finite difference (FDM) and finite element methods (FEM) on some project applications.
Key Takeaway Points:
- Meshing process in Flac3D compared with the mesh generation in GTS NX.
-FISH subroutine programmed to export the mesh from GTS NX to Flac3D.
- The results of MIDAS compared with Flac as well as the calculation time.
Presentation Models - FISH Import Codes
Bridge Pier Fish Import Code |
![download-button-orange](https://www.midasoft.com/hs-fs/hubfs/MIDAS%20-%20Button/download-button-orange.png?width=291&name=download-button-orange.png) |
3D Dam Mesh Fish Import Code |
![download-button-orange](https://www.midasoft.com/hs-fs/hubfs/MIDAS%20-%20Button/download-button-orange.png?width=291&name=download-button-orange.png)
|
Seepage Fish Import Code |
![download-button-orange](https://www.midasoft.com/hs-fs/hubfs/MIDAS%20-%20Button/download-button-orange.png?width=291&name=download-button-orange.png)
|
Presentation Slides
![pdf-download-button-gts_nx](https://www.midasoft.com/hs-fs/hubfs/MIDAS%20-%20Button/pdf-download-button-gts_nx.png?width=291&name=pdf-download-button-gts_nx.png)
![speaker-icon1](https://www.midasoft.com/hs-fs/hubfs/MIDAS%20-%20Icons/speaker-icon1.jpg?width=450&name=speaker-icon1.jpg) |
Speaker : MIDASoft, Inc.
Category : Geotechnical
Software : midas GTS NX
Date : 2018-05-17
|
Add a Comment